Soundcore Motion X600 Bluetooth Speaker User Manual (2024)

Table of Contents

Soundcore Motion X600 Bluetooth Speaker

At a Glance

Charging

Use a certified USB-C cable and charger to prevent any damage. Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.

Flashing red Low-battery
Steady red Charging
Steady white Fully charged

Powering On / Off

Press once Power on
Steady white Power on
Press and hold for at least 2 seconds Power off
Light off Power off

This speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.

Press once Enter Bluetooth pairing mode
Flashing blue Bluetooth pairing
Steady blue Bluetooth connected
To re-enter Bluetooth pairing mode, press the Bluetooth button once.
This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode
Two identical Motion X600 speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).

Connect either speaker with your Bluetooth device.
On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.

Press and hold for at least 2 seconds Enter TWS pairing mode
Flashing white TWS pairing
Steady blue (Speaker 1) TWS connected
Steady white (Speaker 2) TWS connected

To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.

Spatial Sound

Spatial sound places sound all around you to create an immersive listening experience.

Press once Turn spatial sound on / off
Steady white Spatial sound on
Light off Spatial sound off

LDAC

Use devices powered by Android 8.0 or later to experience LDAC-quality sound.

AUX Mode

Insert a 3.5mm AUX cable (not included) to play audio on an external device.

When using AUX mode, control audio playback via the connected device.

Button Controls

Reset

Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.

App

Download the soundcore app to enhance your experience.

Product information: Check the product name and software version, or read the user manual.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker to the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are 6 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- soundcore Signature: Standard EQ mode optimized for well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- Custom: Customize the EQ setting to suit you in the app.
- BassUp: Turn on BassUp to enhance the low-frequency sound.
Set auto-power off time: Set an auto-power off time (5 / 10 / 20 / 60 minutes, 20 minutes by default). The speaker will automatically power off when the time is up.
Voice prompt: Mute or restore the voice prompt while powering on / off.

Specifications

Specifications are subject to change without notice.

DC power input 5V 3A
Battery capacity 6400mAh / 7.2V
Audio output power 50W
Charging time 6 hours
Playtime (varies by volume level and music content) 12 hours
Waterproof level IPX7
Bluetooth version 5.3
Bluetooth range 100m / 328ft

DOWNLOAD LINK

For More Manuals

soundcore Sleep A10 Noise Blocking Earbuds User Manual

November 3, 2023

Soundcore Life P3i Active Noise Earbuds User Manual

October 21, 2023

Soundcore Sport X10 All-New Workout Earbuds User Manual

November 3, 2023

Soundcore Motion X600 Bluetooth Speaker User Manual (2024)

FAQs

How to charge Soundcore Motion X600? ›

Applicable for those products

Use a certified 5V/3A wall charger.
Charge the Motion X600 speaker with the included charging cable.
Charge for at least 1 hour before turning on Motion X600.

Why can't I connect to my Soundcore speaker? ›

- Uninstall the Soundcore app and reinstall the Soundcore app. - Reset the speaker . - Try the speaker with another phone. Please note that currently the Soundcore app is compatible with iPhone and Android phones.

Discover More ›

Why is no sound coming from my Bluetooth speaker? ›

If your Bluetooth speaker is connected, but you can't hear any sound, there could be several reasons. First, ensure that the volume on both your device and the speaker is turned up. Additionally, check if the audio is muted or if the speaker is set to a different output source.

Learn More ›

How do you charge a Soundcore motion speaker? ›

Use the included USB cable to charge your Soundcore Motion+ and make sure it is fully charged before its first use. USB type C cable only supports charge in, it does not support charge out. Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.

Read On ›

How do I know if my Soundcore case is charging? ›

When the charging case is plugged in to charge, the indicator will light up white. 3. When putting both earbuds into the charging case, the indicator on the charging case will flash 3 times to indicate the battery of the charging case.