[OpenWrt Wiki] ZyXEL NBG7815 (Armor G5) (2024)

1. Factory to Openwrt:All operations needs root access→ Root Access:

Login as root and make below steps:

1. Put Openwrt image to your router, you have two options:

a) Use WinSCP client(if you have ssh access) for putting your openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin in /tmp/ApplicationData/

b) login as root, go to /tmp/ApplicationData and get latest nbg7815-squashfs-sysupgrade version from site https://downloads.openwrt.org/snapshots/targets/ipq807x/generic/ using wget

2. Download flash script https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh and put in catalog /tmp/ApplicationData

3. Make sure that sysupgrade image and script is in folder /tmp/ApplicationData/ folder

4. run flash_to_openwrt.sh

After that, reset router manually (power off/on)

Example:

 root@NBG7815:~# cd /tmp/ApplicationData root@NBG7815:~# wget -O openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin https://downloads.openwrt.org/snapshots/targets/ipq807x/generic/openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin root@NBG7815:~# wget https://raw.githubusercontent.com/itorK/nbg7815_tools/main/flash_to_openwrt.sh root@NBG7815:~# chmod 755 ./flash_to_openwrt root@NBG7815:~# ./flash_to_openwrt root@NBG7815:~# reboot

2. If you already have OpenWrt use sysupgrade or LuCi “Flash new firware image” option, after this operation use script from https://github.com/itorK/nbg7815_tools/blob/main/change_boot_partition.sh to change boot partition

Return to original firmware from Openwrt

1. Get script from https://github.com/itorK/nbg7815_tools/blob/main/change_boot_partition.sh

2. Run script

 sh change_boot_partition.sh

Hard debricking from U-boot with Serial Access:

1. Get orginal firmware V1.00(ABSK.7)C0.bin

2. Setup your laptop to 192.168.1.99

3. install and configure TFTP server, connect your laptop by cable, turn off windows firewall

4. Interrupt autoboot and execute command (no need unlock):

 NBG7815> ATUR V1.00(ABSK.7)C0.bin

Alternatively, you may recover the device with OpenWrt initramfs:

1. Stop the bootloader by pressing any key. Once you're presented with the NBG7815> prompt,unlock the bootloader via the tool.sh script as detailed in theFull U-boot access section.

2. Connect to one of the lan Ethernet interfaces of the device,and configure your host computer to have static 192.168.1.99/24 Legacy IP address.

3. Start a TFTP server in a directory where you downloaded (or built) a (possibly known-good)openwrt-ipq807x-generic-zyxel_nbg7815-initramfs-uImage.itb file.

4. Once presented with the ZYXEL# proompt, issue the following command:

tftpboot openwrt-ipq807x-generic-zyxel_nbg7815-initramfs-uImage.itb

If the download was successful, you can proceed; otherwise, check your setup.

5. Boot the initramfs:

bootm

6. If you didn't alter vendor eMMC partition table, skip to the next step. If you did, you need to

opkg update && opkg install fdisk

and then use fdisk manually to create GPT matchingvendor partition table.

7. If all went well, you should be in OpenWrt now; you may

sysupgrade -n /tmp/openwrt...

to a working sysupgrade image. In no case you should use any force option.

Insert photo of front of the casing

Insert photo of back of the casing

Insert photo of backside label

Insert photo of PCB

Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

Connect only RX, TX, GND cable to your TTL/FTDI interface

→ port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Zyxel zloader v1.0.0 (2020-01-06 - 08:24)Multiboot clinent version: 2.0ipq807x_eth_halt: doneeth0 PHY0 Down Speed :10 Half duplexeth0 PHY1 Down Speed :10 Half duplexeth0 PHY2 Down Speed :10 Half duplexeth0 PHY3 Down Speed :10 Half duplexeth0 PHY4 Down Speed :10 Half duplex10M speed not supportedipq807x_eth_halt: doneEthernet interface failed to initialized!Hit any key to stop autoboot: 3NBG7815> ATHEATEN x[,y] set BootExtension Debug Flag (y=password)ATSE x show the seed of password generatorATSH dump manufacturer related data in ROMATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)ATGO boot up whole systemATUR x upgrade RAS image (filename)ATUS x upgrade image by fit script (filename)NBG7815>

BusyBox v1.25.1 (2021-09-29 08:20:53 UTC) built-in shell (ash)ash: can't access tty; job control turned off _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- (eb4b1a4+r49254)================= FAILSAFE MODE active ================special commands:* firstboot reset settings to factory defaults* mount_root mount root-partition with config filesafter mount_root:* passwd change root's password* /etc/config directory with config filesfor more help see:http://wiki.openwrt.org/doc/howto/generic.failsafe=======================================================root@(none):/#root@(none):/etc# cat openwrt_releaseDISTRIB_ID='OpenWrt'DISTRIB_RELEASE='Chaos Calmer'DISTRIB_REVISION='eb4b1a4+r49254'DISTRIB_CODENAME='chaos_calmer'DISTRIB_TARGET='ipq/ipq807x_64'DISTRIB_DESCRIPTION='OpenWrt Chaos Calmer 15.05.1'DISTRIB_TAINTS='no-all busybox'

Format: Log Type - Time(microsec) - Message - Optional InfoLog Type: B - Since Boot(Power On Reset), D - Delta, S - StatisticS - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147S - IMAGE_VARIANT_STRING=HAABANAZAS - OEM_IMAGE_VERSION_STRING=CRMS - Boot Config, 0x000002e1B - 203 - PBL, StartB - 2737 - bootable_media_detect_entry, StartB - 2885 - bootable_media_detect_success, StartB - 2889 - elf_loader_entry, StartB - 11481 - auth_hash_seg_entry, StartB - 11721 - auth_hash_seg_exit, StartB - 252687 - elf_segs_hash_verify_entry, StartB - 313206 - PBL, EndB - 340502 - SBL1, StartB - 394914 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4B - 401685 - pm_device_init, StartB - 528626 - PM_SET_VAL:SkipD - 126239 - pm_device_init, DeltaB - 530913 - pm_driver_init, StartD - 5368 - pm_driver_init, DeltaB - 537349 - clock_init, StartD - 2135 - clock_init, DeltaB - 541405 - boot_flash_init, StartD - 16470 - boot_flash_init, DeltaB - 561627 - boot_config_data_table_init, StartD - 1006 - boot_config_data_table_init, Delta - (575 Bytes)B - 569282 - Boot Setting : 0x00000618B - 573003 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:241B - 580110 - sbl1_ddr_set_params, StartB - 583922 - CPR configuration: 0x30cB - 587308 - cpr_init, StartB - 590175 - Rail:0 Mode: 5 Voltage: 824000B - 595299 - CL CPR settled at 776000mVB - 598105 - Rail:1 Mode: 5 Voltage: 888000B - 602405 - Rail:1 Mode: 7 Voltage: 928000D - 16439 - cpr_init, DeltaB - 609176 - Pre_DDR_clock_init, StartB - 613202 - Pre_DDR_clock_init, EndB - 616588 - DDR Type : PCDDR3B - 622352 - do ddr sanity test, StartD - 1067 - do ddr sanity test, DeltaB - 627080 - DDR: Start of HAL DDR Boot TrainingB - 631838 - DDR: End of HAL DDR Boot TrainingB - 637511 - DDR: Checksum to be stored on flash is 1873222707B - 647911 - Image Load, StartD - 335866 - QSEE Image Loaded, Delta - (1373936 Bytes)B - 983869 - Image Load, StartD - 61 - SEC Image Loaded, Delta - (0 Bytes)B - 991524 - Image Load, StartD - 9791 - DEVCFG Image Loaded, Delta - (26004 Bytes)B - 1001406 - Image Load, StartD - 30897 - RPM Image Loaded, Delta - (105964 Bytes)B - 1032394 - Image Load, StartD - 144631 - APPSBL Image Loaded, Delta - (588472 Bytes)B - 1177147 - QSEE Execution, StartD - 61 - QSEE Execution, DeltaB - 1182973 - USB D+ check, StartD - 0 - USB D+ check, DeltaB - 1189347 - SBL1, EndD - 851163 - SBL1, DeltaS - Flash Throughput, 4428 KB/s (2095623 Bytes, 473169 us)S - DDR Frequency, 466 MHzS - Core 0 Frequency, 1651 MHzU-Boot 2016.01 (Jan 06 2020 - 08:24:12 +0000)DRAM: smem ram ptable found: ver: 1 len: 41 GiBNAND: Not an ONFI deviceONFI probe failedID = ffffffffVendor = ffDevice = ffqpic_nand: unknown NAND device manufacturer: ff device: ffU-Boot BUG at drivers/mtd/mtdcore.c:420!SPI_ADDR_LEN=3SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiBipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x8000008 MiBMMC: <NULL>: 0In: serial@78B3000Out: serial@78B3000Err: serial@78B3000machid: 80100f1Setting bus to 0Valid chip addresses: 40Net: MAC0 addr:bc:cf:4f:ff:18:80PHY ID1: 0x4dPHY ID2: 0xd0b1PHY ID1: 0x4dPHY ID2: 0xd101SPI_ADDR_LEN=3SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiBdevice 0 offset 0x650000, size 0x80000SF: 524288 bytes @ 0x650000 Read: OKCRC check good on phy fw file (0x4B33)PHYFW:Loading IRAM...........done.PHYFW:Loading DRAM..............done.phy fw image load good CRC-16 matches (0x6FFA)PHY ID1: 0x31c3PHY ID2: 0x1c12EDMA ver 1 hw initNum rings - TxDesc:1 (0-0) TxCmpl:1 (7-7)RxDesc:1 (15-15) RxFill:1 (7-7)ipq807x_edma_alloc_rings: successfullipq807x_edma_setup_ring_resources: successfullipq807x_edma_configure_rings: successfullipq807x_edma_hw_init: successfulleth0SPI_ADDR_LEN=3SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiBdevice 0 offset 0x530000, size 0x10000SF: 65536 bytes @ 0x530000 Read: OK## Booting kernel from Legacy Image at 44000000 ... Image Name: Zyxel zloader Image Type: ARM U-Boot Standalone Program (gzip compressed) Data Size: 15340 Bytes = 15 KiB Load Address: 5f000000 Entry Point: 5f00000c Verifying Checksum ... OK Uncompressing Standalone Program ... OKZyxel zloader v1.0.0 (2020-01-06 - 08:24)Multiboot clinent version: 2.0ipq807x_eth_halt: doneeth0 PHY0 up Speed :1000 Full duplexeth0 PHY1 Down Speed :10 Half duplexeth0 PHY2 Down Speed :10 Half duplexeth0 PHY3 Down Speed :10 Half duplexeth0 PHY4 up Speed :1000 Full duplex10M speed not supportedipq807x_eth_init: doneHit any key to stop autoboot: 0ipq807x_eth_halt: done*** Booting from system 1 ***MMC read: dev # 0, block # 163874, count 12288 ... 12288 blocks read: OK## Loading kernel from FIT Image at 44000000 ... Using 'config@nbg7815' configuration Trying 'kernel@1' kernel subimage Description: ARM64 OpenWrt Linux-4.4.60 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 4084783 Bytes = 3.9 MiB Architecture: AArch64 OS: Linux Load Address: 0x41080000 Entry Point: 0x41080000 Hash algo: crc32 Hash value: 6f0d3aaa Hash algo: sha1 Hash value: 00e6f72c77acd5fed3999b0148c5a524802e1357 Verifying Hash Integrity ... crc32+ sha1+ OK## Loading fdt from FIT Image at 44000000 ... Using 'config@nbg7815' configuration Trying 'fdt@nbg7815' fdt subimage Description: ARM64 OpenWrt qcom-ipq807x-zyxel device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x44439584 Data Size: 80584 Bytes = 78.7 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 689818c1 Hash algo: sha1 Hash value: 6878282b432ec6f7c84ff68feb774c222850c457 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x44439584 Uncompressing Kernel Image ... OK Loading Device Tree to 4a3e9000, end 4a3ffac7 ... OKUsing machid 0x80100f1 from environmentStarting kernel ...Jumping to AARCH64 kernel via monitor[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Linux version 4.4.60 (openwrt@0e6791bdf6c5) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 eb4b1a4+r49254) ) #1 SMP PREEMPT Wed Sep 29 08:31:14 UTC 2021[ 0.000000] Boot CPU: AArch64 Processor [410fd034][ 0.000000] Ignoring memory range 0x40000000 - 0x41000000[ 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI not found.[ 0.000000] Reserved memory: OVERLAP DETECTED![ 0.000000] wifi_dump@51000000 (0x0000000051000000--0x0000000051600000) overlaps with wigig_dump@51200000 (0x0000000051200000--0x0000000051600000)[ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.0 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef52000 s21120 r8192 d32128 u61440[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: enabling workaround for ARM erratum 845719[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225288[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a rootwait swiotlb=1[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)[ 0.000000] software IO TLB [mem 0x7fe0a000-0x7fe4a000] (0MB) mapped at [ffffffc03ee0a000-ffffffc03ee49fff][ 0.000000] Memory: 887072K/915456K available (5602K kernel code, 637K rwdata, 2380K rodata, 232K init, 406K bss, 28384K reserved, 0K cma-reserved)[ 0.000000] Virtual kernel memory layout:[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)[ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc1000000 ( 15 MB actual)[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB)[ 0.000000] .init : 0xffffffc00084e000 - 0xffffffc000888000 ( 232 KB)[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc00084da14 ( 7991 KB)[ 0.000000] .data : 0xffffffc000898000 - 0xffffffc000937400 ( 637 KB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000] Build-time adjustment of leaf fanout to 64.[ 0.000000] NR_IRQS:64 nr_irqs:64 0[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns[ 0.000476] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)[ 0.000487] pid_max: default: 32768 minimum: 301[ 0.000582] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)[ 0.000592] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)[ 0.001145] Initializing cgroup subsys io[ 0.001161] Initializing cgroup subsys memory[ 0.001187] Initializing cgroup subsys devices[ 0.001198] Initializing cgroup subsys freezer[ 0.001208] Initializing cgroup subsys net_cls[ 0.001217] Initializing cgroup subsys pids[ 0.001464] EFI services will not be available.[ 0.001484] ASID allocator initialised with 65536 entries[ 0.052039] MSM Memory Dump base table set up[ 0.052060] MSM Memory Dump apps data table set up[ 0.090116] Detected VIPT I-cache on CPU1[ 0.090161] CPU1: Booted secondary processor [410fd034][ 0.120102] Detected VIPT I-cache on CPU2[ 0.120130] CPU2: Booted secondary processor [410fd034][ 0.150131] Detected VIPT I-cache on CPU3[ 0.150157] CPU3: Booted secondary processor [410fd034][ 0.150208] Brought up 4 CPUs[ 0.150233] SMP: Total of 4 processors activated.[ 0.150243] CPU: All CPU(s) started at EL1[ 0.150266] alternatives: patching kernel code[ 0.167375] DMI not present or invalid.[ 0.167631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.167655] futex hash table entries: 1024 (order: 5, 131072 bytes)[ 0.168023] pinctrl core: initialized pinctrl subsystem[ 0.168937] NET: Registered protocol family 16[ 0.190062] cpuidle: using governor ladder[ 0.220080] cpuidle: using governor menu[ 0.220214] vdso: 2 pages (1 code @ ffffffc00089d000, 1 data @ ffffffc00089c000)[ 0.220246] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.220359] DMA: preallocated 256 KiB pool for atomic allocations[ 0.220458] CPU: unavail, SoC Version: 2.0[ 0.220492] <CORE> glink_init: IPC Logging Disabled[ 0.220894] IPC logging disabled[ 0.220900] IPC logging disabled[ 0.220905] IPC logging disabled[ 0.220909] IPC logging disabled[ 0.220913] IPC logging disabled[ 0.223717] Soc version is not 1, changing clock offsets[ 0.235153] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ![ 0.237473] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ![ 0.239712] msm_rpm_dev_probe: APSS-RPM communication over GLINK[ 0.240835] sps:sps is ready.[ 0.252172] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4[ 0.252479] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2[ 0.282047] pps_core: LinuxPPS API ver. 1 registered[ 0.282054] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.282077] PTP clock support registered[ 0.282252] dmi: Firmware registration failed.[ 0.283667] Advanced Linux Sound Architecture Driver Initialized.[ 0.284298] clocksource: Switched to clocksource arch_sys_counter[ 0.287533] NET: Registered protocol family 2[ 0.288156] TCP established hash table entries: 8192 (order: 4, 65536 bytes)[ 0.288264] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)[ 0.288449] TCP: Hash tables configured (established 8192 bind 8192)[ 0.288504] UDP hash table entries: 512 (order: 2, 16384 bytes)[ 0.288541] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)[ 0.288719] NET: Registered protocol family 1[ 0.289483] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available[ 0.297226] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.297446] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 0.298010] fuse init (API version 7.23)[ 0.301008] Key type asymmetric registered[ 0.301025] Asymmetric key parser 'x509' registered[ 0.301057] io scheduler noop registered[ 0.301071] io scheduler deadline registered (default)[ 0.303473] 20000000.pci supply vdda not found, using dummy regulator[ 0.303523] 20000000.pci supply vdda_phy not found, using dummy regulator[ 0.303582] 20000000.pci supply vdda_refclk not found, using dummy regulator[ 0.304089] PCI host bridge /soc/pci@20000000 ranges:[ 0.304117] IO 0x20200000..0x202fffff -> 0x20200000[ 0.304131] MEM 0x20300000..0x20ffffff -> 0x20300000[ 1.341300] qcom-pcie 20000000.pci: phy link never came up[ 1.342841] qcom-pcie 20000000.pci: hostinit failed[ 1.342851] qcom-pcie 20000000.pci: cannot initialize host[ 1.342996] qcom-pcie: probe of 20000000.pci failed with error -110[ 1.343173] 10000000.pci supply vdda not found, using dummy regulator[ 1.343213] 10000000.pci supply vdda_phy not found, using dummy regulator[ 1.343251] 10000000.pci supply vdda_refclk not found, using dummy regulator[ 1.343688] PCI host bridge /soc/pci@10000000 ranges:[ 1.343710] IO 0x10200000..0x102fffff -> 0x10200000[ 1.343724] MEM 0x10300000..0x10ffffff -> 0x10300000[ 2.378763] qcom-pcie 10000000.pci: phy link never came up[ 2.380303] qcom-pcie 10000000.pci: hostinit failed[ 2.380312] qcom-pcie 10000000.pci: cannot initialize host[ 2.380424] qcom-pcie: probe of 10000000.pci failed with error -110[ 2.380789] MDSS QPIC HW Base phy_Address=0x7980000 virt=ffffff80004c0000[ 2.381180] mdss_qpic_panel_probe: Panel Name = qpic lcd panel[ 2.382426] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully![ 2.387613] NET: Registered protocol family 27[ 2.387625] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled[ 2.387638] qmi_log_init: IPC Logging disabled[ 2.387643] qmi_log_init: IPC Logging disabled[ 2.387738] msm_rpm_log_probe: OK[ 2.388381] msm-dcc b3000.dcc: DCC XPU is not specified[ 2.388632] msm-dcc b3000.dcc: DCC SRAM dump setup failed[ 2.388655] msm-dcc b3000.dcc: jiffies_64: 0xffff8bbe, cntvct_64: 0x1a45b389[ 2.388666] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80003de004)[ 2.388677] msm-dcc b3000.dcc: gcnt_lo: 0x1a45b53d(0xffffff80003de000)[ 2.389292] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set[ 2.390034] msm_serial 78b3000.serial: msm_serial: detected port #0[ 2.390067] msm_serial 78b3000.serial: uartclk = 3686400[ 2.390101] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM[ 2.390122] msm_serial: console setup on port #0[ 3.258517] console [ttyMSM0] enabled[ 3.263489] msm_serial 78b1000.serial: msm_serial: detected port #1[ 3.266779] msm_serial 78b1000.serial: uartclk = 19200000[ 3.272837] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM[ 3.278726] msm_serial: driver initialized[ 3.287216] msm_serial_hsl_init: driver initialized[ 3.299856] brd: module loaded[ 3.300534] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64[ 3.303341] m25p80 spi32766.0: found w25q64dw, expected n25q128a11[ 3.309068] m25p80 spi32766.0: w25q64dw (8192 Kbytes)[ 3.315116] 22 ofpart partitions found on MTD device spi32766.0[ 3.320116] Creating 22 MTD partitions on "spi32766.0":[ 3.325890] 0x000000000000-0x000000050000 : "0:SBL1"[ 3.331737] 0x000000050000-0x000000060000 : "0:MIBIB"[ 3.336929] 0x000000060000-0x000000080000 : "0:BOOTCONFIG"[ 3.341824] 0x000000080000-0x0000000a0000 : "0:BOOTCONFIG1"[ 3.347232] 0x0000000a0000-0x000000220000 : "0:QSEE"[ 3.352670] 0x000000220000-0x0000003a0000 : "0:QSEE_1"[ 3.357905] 0x0000003a0000-0x0000003b0000 : "0:DEVCFG"[ 3.362816] 0x0000003b0000-0x0000003c0000 : "0:DEVCFG_1"[ 3.367968] 0x0000003c0000-0x0000003d0000 : "0:APDP"[ 3.373409] 0x0000003d0000-0x0000003e0000 : "0:APDP_1"[ 3.378381] 0x0000003e0000-0x000000420000 : "0:RPM"[ 3.383341] 0x000000420000-0x000000460000 : "0:RPM_1"[ 3.388115] 0x000000460000-0x000000470000 : "0:CDT"[ 3.393333] 0x000000470000-0x000000480000 : "0:CDT_1"[ 3.398007] 0x000000480000-0x000000540000 : "0:APPSBL"[ 3.403182] 0x000000540000-0x000000600000 : "0:APPSBL_1"[ 3.408245] 0x000000600000-0x000000610000 : "0:APPSBLENV"[ 3.413700] 0x000000610000-0x000000650000 : "0:ART"[ 3.419004] 0x000000650000-0x0000006d0000 : "0:ETHPHYFW"[ 3.423685] 0x0000006d0000-0x0000006e0000 : "0:CRT"[ 3.429259] 0x0000006e0000-0x0000006f0000 : "DUAL_FLAG"[ 3.433888] 0x0000006f0000-0x000000800000 : "RESERVED"[ 3.439765] spmi spmi-0: PMIC Arb Version-2 (0x20010000)[ 3.446577] libphy: Fixed MDIO Bus: probed[ 3.889787] qca-mdio 90000.mdio: Could not find phy-reset-gpio[ 3.889895] libphy: qca_mdio: probed[ 3.896259] qca-mdio 90000.mdio: qca-mdio driver was registered[ 3.898445] Unable to create IPC log context![ 3.904190] cnss: Platform driver probed successfully.[ 3.908689] Skip QCA8074V1 in V2 platform[ 3.913528] cnss_genl: genl_register_family fail: -17[ 3.917534] cnss: CNSS genl init failed -17[ 3.922535] cnss: Platform driver probed successfully.[ 3.926763] i2c /dev entries driver[ 3.941108] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com[ 3.941584] sdhci: Secure Digital Host Controller Interface driver[ 3.948679] sdhci: Copyright(c) Pierre Ossman[ 3.954625] sdhci-pltfm: SDHCI platform and OF driver helper[ 3.959540] qcom_ice_get_pdevice: invalid device list[ 3.964774] sdhci_msm 7824900.sdhci: sdhci_msm_ice_get_dev: ICE device not probed yet[ 3.969709] sdhci_msm 7824900.sdhci: sdhci_msm_probe: required ICE device not probed yet err = -517[ 3.994455] lp5569x 0-0032: lp5569 Programmable led chip found[ 4.016273] lp5569x 0-0035: lp5569 Programmable led chip found[ 4.018554] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed[ 4.021051] ICE IRQ = 81[ 4.029805][ 4.029805] Version Rollback Feature Disabled[ 4.032721] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000[ 4.037683] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000[ 4.054948] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000[ 4.070856] sps:BAM 0x0000000008b04000 is registered.[ 4.078629] DEV CI test message[ 4.083303] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group[ 4.086039] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group[ 4.096511] remoteproc remoteproc0: q6v5-m3 is available[ 4.106997] SPMI VADC - Min ch: 0 Max ch: 15[ 4.113944] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000[ 4.116405] coresight-csr 6001000.csr: CSR initialized[ 4.123852] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000[ 4.128800] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000[ 4.136340] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000[ 4.143705] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000[ 4.151098] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000[ 4.158481] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000[ 4.165851] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000[ 4.173232] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000[ 4.180612] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000[ 4.187993] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000[ 4.195372] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000[ 4.202730] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000[ 4.210131] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000[ 4.217509] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000[ 4.224889] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000[ 4.232250] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000[ 4.239640] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000[ 4.247198] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000[ 4.254525] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000[ 4.261927] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000[ 4.269370] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000[ 4.276744] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000[ 4.283757] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000[ 4.300866] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000[ 4.316751] sps:BAM 0x0000000006044000 is registered.[ 4.324396] coresight-tmc 6028000.tmc: TMC initialized[ 4.329191] coresight-tmc 6027000.tmc: TMC initialized[ 4.334344] coresight-funnel 6021000.funnel: FUNNEL initialized[ 4.339359] coresight-funnel 6100000.funnel: FUNNEL initialized[ 4.345196] coresight-funnel 6120000.funnel: FUNNEL initialized[ 4.351084] coresight-funnel 61a1000.funnel: FUNNEL initialized[ 4.357579] coresight-etm4x 619c000.etm: ETM 4.0 initialized[ 4.363216] coresight-etm4x 619d000.etm: ETM 4.0 initialized[ 4.369171] coresight-etm4x 619e000.etm: ETM 4.0 initialized[ 4.374855] coresight-etm4x 619f000.etm: ETM 4.0 initialized[ 4.380110] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized[ 4.385859] coresight-stm 6002000.stm: STM initialized[ 4.394480] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000[ 4.398260] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized[ 4.409042] Netfilter messages via NETLINK v0.30.[ 4.413469] nf_conntrack version 0.5.0 (6930 buckets, 27720 max)[ 4.418407] ctnetlink v0.93: registering with nfnetlink.[ 4.424839] NET: Registered protocol family 10[ 4.430201] NET: Registered protocol family 17[ 4.433702] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.[ 4.438153] Bridge firewalling registered[ 4.450865] 8021q: 802.1Q VLAN Support v1.8[ 4.456283] <CORE> glink_core_register_transport: IPC Logging disabled[ 4.458865] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4[ 4.465377] msm_glink_smem_native_xprt rx fifo not found[ 4.472723] pmd9655_s3: supplied by e-smps1-reg[ 4.478312] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0[ 4.482364] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1[ 4.488994] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0[ 4.496638] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable[ 4.504137] cpr3_mem_acc_init: apc: not using memory accelerator regulator[ 4.513281] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 720000 uV[ 4.520229] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 872000 uV[ 4.530215] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 944000 uV[ 4.540020] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1032000 uV[ 4.549890] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 725, quot_offset[ 7]= 0[ 4.559641] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]=1004, quot_offset[ 7]= 275[ 4.570492] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1117, quot_offset[ 7]= 110[ 4.581429] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1261, quot_offset[ 7]= 140[ 4.592493] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop[ 4.603816] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2[ 4.610154] pmd9655_s4: supplied by e-smps1-reg[ 4.617310] cpr3_mem_acc_init: npu: not using memory accelerator regulator[ 4.621600] npu_corner: fused NOM: open-loop= 816000 uV[ 4.628555] npu_corner: fused TURBO: open-loop= 880000 uV[ 4.634409] npu_corner: fused NOM: open-loop= 816000 uV[ 4.639999] npu_corner: fused TURBO: open-loop= 880000 uV[ 4.645676] npu_corner: Normal and Cold condition init done. Default to normal.[ 4.652390] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz[ 4.658514] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz[ 4.666191] qcom_ice_get_pdevice: found ice device ffffffc03cf08a00[ 4.674317] qcom_ice_get_pdevice: matching platform device ffffffc03d575c00[ 4.680393] sdhci_msm 7824900.sdhci: No vreg data found for vdd[ 4.687321] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io[ 4.693366] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff80008c8000[ 4.700533] sdhci_msm 7824900.sdhci: No vmmc regulator found[ 4.707364] sdhci_msm 7824900.sdhci: No vqmmc regulator found[ 4.754300] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit[ 4.754478] DEV CI test message[ 4.763373] remoteproc remoteproc1: q6v5-wcss is available[ 4.766280] hctosys: unable to open rtc device (rtc0)[ 4.790720] pmd9655_ldo11: disabling[ 4.793222] ALSA device list:[ 4.793351] No soundcards found.[ 4.796499] Waiting for root device PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a...[ 4.827921] mmc0: MAN_BKOPS_EN bit is not set[ 4.831014] mmc0: new high speed MMC card at address 0001[ 4.831539] mmcblk0: mmc0:0001 M62704 3.53 GiB[ 4.836705] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB[ 4.842297] GPT: device [179:4] (rootfs) set to be root filesystem[ 4.846880] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11[ 4.906245] VFS: Mounted root (squashfs filesystem) readonly on device 179:8.[ 4.906360] Freeing unused kernel memory: 232K (ffffffc00084e000 - ffffffc000888000)[ 4.912364] Freeing alternatives memory: 44K (ffffffc000888000 - ffffffc000893000)[ 5.104844] init: Console is alive[ 5.104943] init: - watchdog -[ 5.764892] usbcore: registered new interface driver usbfs[ 5.764934] usbcore: registered new interface driver hub[ 5.769313] usbcore: registered new device driver usb[ 5.775887] Button Hotplug driver version 0.4.1[ 5.782092] SCSI subsystem initialized[ 5.788422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 5.788711] ehci-platform: EHCI generic platform driver[ 5.800944] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy[ 5.807816] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout[ 5.807837] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868[ 6.014667] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy[ 6.022067] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout[ 6.022088] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868[ 6.230190] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller[ 6.230224] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1[ 6.234750] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010[ 6.242144] xhci-hcd xhci-hcd.0.auto: irq 211, io mem 0x08a00000[ 6.251099] hub 1-0:1.0: USB hub found[ 6.257061] hub 1-0:1.0: 1 port detected[ 6.260743] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller[ 6.264707] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2[ 6.270003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.[ 6.277736] hub 2-0:1.0: USB hub found[ 6.285871] hub 2-0:1.0: 1 port detected[ 6.289561] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller[ 6.293505] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3[ 6.298923] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010[ 6.306379] xhci-hcd xhci-hcd.1.auto: irq 212, io mem 0x08c00000[ 6.315239] hub 3-0:1.0: USB hub found[ 6.321282] hub 3-0:1.0: 1 port detected[ 6.324948] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller[ 6.328918] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4[ 6.334237] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.[ 6.341968] hub 4-0:1.0: USB hub found[ 6.350106] hub 4-0:1.0: 1 port detected[ 6.356103] usbcore: registered new interface driver usb-storage[ 6.358188] usbcore: registered new interface driver uas[ 7.107575] init: - preinit -Press the [f] key and hit [enter] to enter failsafe modePress the [1], [2], [3] or [4] key and hit [enter] to select the debug levelBefore mount_root/dev/mmcblk0p1: recovering journal/dev/mmcblk0p1: 611/2048 files (1.1% non-contiguous), 6380/8192 [ 9.405745] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)[ 9.405871] random: procd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)[ 9.414904] mount_root: switching to jffs2 overlayblocksAfter mount_root131072+0 records in131072+0 records out131072 bytes (128.0KB) copied, 0.243176 se[ 9.683944] procd: - early -[ 9.688011] procd: - watchdog -conds, 526.4KB/s[ 10.283155] procd: - ubus -[ 11.282554] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available)[ 11.282682] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available)[ 11.290537] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available)[ 11.300263] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available)[ 11.308461] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available)[ 11.317365] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available)[ 11.326456] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available)[ 11.335218] procd: - init -Please press Enter to activate this console. WIFI FW mount is successful[ 13.867932] cfg80211: World regulatory domain updated:[ 13.867957] cfg80211: DFS Master region: unset[ 13.871953] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)[ 13.876580] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)[ 13.877554] ntfs: driver 2.1.32 [Flags: R/O MODULE].[ 13.878825] Initializing XFRM netlink socket[ 13.879240] NET: Registered protocol family 15[ 13.903529] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)[ 13.907673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)[ 13.916963] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)[ 13.924934] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)[ 13.934656] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)[ 13.944101] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)[ 13.952210] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)[ 13.980317] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1[ 13.984018] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist![ 13.990930] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus[ 13.997096] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000[ 14.004209] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000[ 14.011499] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0[ 14.017925] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xf[ 14.023477] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xd[ 14.029130] ssdk_dt_parse_phy_info[569]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT[ 14.034781] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist![ 14.042134] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC bc:cf:4f:ff:18:80[ 14.048051] ssdk_plat_init start[ 14.125489] ssdk_ppe_clock_init[464]:INFO:ppe and uniphy clock init successfully![ 14.128625] ssdk_probe[1878]:INFO:ess_rst doesn't exist![ 14.135787] HPPE initializing...[ 14.137117] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1[ 14.140535] <DBG> MALIBU 8075 Found, phytype=2[ 14.148652] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1[ 14.153034] <DBG> MALIBU 8075 Found, phytype=2[ 14.161326] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1[ 14.165716] <DBG> MALIBU 8075 Found, phytype=2[ 14.173974] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1[ 14.178387] <DBG> MALIBU 8075 Found, phytype=2[ 14.186651] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd101[ 14.191103] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=31c31c12[ 14.199306] <DBG> AQUANTIA PHY Found, phytype=3[ 14.207895] malibu_phy_api_ops_init[2851]:INFO:qca probe malibu phy driver succeeded![ 14.219353] aquantia_phy_api_ops_init[2180]:INFO:qca probe aquantia phy driver succeeded![ 14.224859] qca808x_phy_api_ops_init[2125]:INFO:qca probe qca808x phy driver succeeded![ 14.233406] qca808x_ptp_register[1377]:INFO:qca808x ptp clock registered[ 14.240311] regi_init[3405]:INFO:Initializing HPPE!![ 14.464292] ssdk_ppe_reset_init[738]:INFO:ppe reset successfully![ 14.470193] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96[ 14.473613] qca_hppe_portctrl_hw_init[165]:INFO:Hawkeye PPE port initializing[ 17.374324] ssdk_switch_register[1617]:INFO:Chip version 0x1500[ 17.377302] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist[ 17.383542] ssdk_switch_register[1642]:INFO:polling is selected[ 17.391267] regi_init[3409]:INFO:Initializing HPPE Done!![ 17.396175] regi_init[3453]:INFO:qca-ssdk module init succeeded![ 17.405332] tun: Universal TUN/TAP device driver, 1.6[ 17.405356] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[ 17.411675] EDMA ver 1 hw init[ 17.415898] EDMA HW Reset completed succesfully[ 17.418733] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)[ 17.423128] RxDesc:1 (15-15) RxFill:1 (7-7)[ 17.429477] GMAC2(ffffffc03ab1f880) Invalid MAC@ - using b6:31:46:42:03:1d[ 17.433297] GMAC3(ffffffc03a773880) Invalid MAC@ - using fe:69:f5:26:9a:98[ 17.440289] GMAC4(ffffffc03a777880) Invalid MAC@ - using b6:8a:29:34:60:60[ 17.447321] GMAC5(ffffffc03aabb880) Invalid MAC@ - using 2a:ca:77:ed:0b:62[ 17.654734] GMAC6(ffffffc03aabf880) Invalid MAC@ - using 2a:12:1a:e8:20:03[ 17.655520] **********************************************************[ 17.660493] * NSS Data Plane driver[ 17.667033] **********************************************************[ 17.676907] l2tp_core: L2TP core driver, V2.0[ 17.677469] l2tp_netlink: L2TP netlink interface[ 17.776711] nss_driver - fw of size 668348 bytes copied to load addr: 40000000, nss_id : 0[ 17.778219] Supported Frequencies -[ 17.783855] 748.8 MHz 1.4976 GHz[ 17.789838] 1.6896 GHz [ 17.790883][ 17.793309] ffffffbffc651600: meminfo init succeed[ 17.833300] node size 2 # items 4[ 17.833326] memory: 40000000 1073741824 (avl 935432192) items 4 active_cores 2[ 17.833809] nss_driver - fw of size 265248 bytes copied to load addr: 40800000, nss_id : 1[ 17.834552] Supported Frequencies -[ 17.834553] 748.8 MHz[ 17.834553] 1.4976 GHz[ 17.834554] 1.6896 GHz[ 17.834554][ 17.834709] ffffffbffc658700: meminfo init succeed[ 17.836266] sit: IPv6 over IPv4 tunneling driver[ 17.837424] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.[ 17.838733] gre: GRE over IPv4 demultiplexor driver[ 17.839190] ip_gre: GRE over IPv4 tunneling driver[ 17.840280] ip6_gre: GRE over IPv6 tunneling driver[ 17.842070] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)[ 17.894806] ffffffbffc651600: nss core 0 booted successfully[ 17.901672] node size 2 # items 4[ 17.906856] QCA multicast snooping installed successfully[ 17.908932] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 17.915648] memory: 40000000 1073741824 (avl 935432192) items 4 active_cores 2[ 17.915826] QCA Hy-Fi multicast installation successfully[ 17.919942] PPP generic driver version 2.4.2[ 17.921084] nss_lag_init[354]:LAG Manager Installed[ 17.922040] NET: Registered protocol family 24[ 17.942546] ffffffbffc658700: nss core 1 booted successfully[ 17.951945] tntfs: module license 'Commercial. For support email support@tuxera.com.' taints kernel.[ 17.952912] Disabling lock debugging due to kernel taint[ 17.964852] Tuxera NTFS driver 3021.4.23.8 [Flags: R/W MODULE].[ 17.967279] Built against headers 4.4.60 #26 SMP PREEMPT Wed Jul 17 13:35:43 CST 2019 arm64[ 17.972921] Running on kernel 4.4.60 #1 SMP PREEMPT Wed Sep 29 08:31:14 UTC 2021 aarch64[ 17.982991] <NSS-CRYPTO>:module loaded Build_ID - 09/29/21, 07:31:58 SoC=ipq807x_64[ 17.991320] cannot find nss-macsec0 node[ 17.997139] cannot find nss-macsec1 node[ 18.001265] cannot find nss-macsec2 node[ 18.005045] nss_macsec init success[ 18.012700] diag: IPC Logging disabled[ 18.080857] hidraw: raw HID events driver (C) Jiri Kosina[ 18.095813] u32 classifier[ 18.095831] input device check on[ 18.097445] Actions configured[ 18.102049] Mirror/redirect action on[ 18.113971] pktgen: Packet Generator for packet performance testing. Version: 2.75[ 18.126157] arp_tables: (C) 2002 David S. Miller[ 18.133628] Bluetooth: Core ver 2.21[ 18.133683] NET: Registered protocol family 31[ 18.136403] Bluetooth: HCI device and connection manager initialized[ 18.140566] Bluetooth: HCI socket layer initialized[ 18.147250] Bluetooth: L2CAP socket layer initialized[ 18.151702] Bluetooth: SCO socket layer initialized[ 18.157800] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 18.161550] Bluetooth: BNEP filters: protocol multicast[ 18.167266] Bluetooth: BNEP socket layer initialized[ 18.175126] usbcore: registered new interface driver btusb[ 18.181629] Ebtables v2.0 registered[ 18.183437] Bluetooth: HCI UART driver ver 2.3[ 18.186324] Bluetooth: HCI UART protocol H4 registered[ 18.190527] Bluetooth: HCI UART protocol BCSP registered[ 18.195665] Bluetooth: HCI UART protocol ATH3K registered[ 18.202330] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 18.206436] Bluetooth: HIDP socket layer initialized[ 18.213434] ip_tables: (C) 2000-2006 Netfilter Core Team[ 18.219879] l2tp_ppp: PPPoL2TP kernel driver, V2.0[ 18.298335] nf_conntrack_rtsp v0.6.21 loading[ 18.406552] nf_nat_rtsp v0.6.21 loading[ 18.408954] PPP MPPE Compression module registered[ 18.409994] PPTP driver version 0.8.5[ 18.415421] Bluetooth: RFCOMM TTY layer initialized[ 18.417786] Bluetooth: RFCOMM socket layer initialized[ 18.422481] Bluetooth: RFCOMM ver 1.11[ 18.429716] usbcore: registered new interface driver usblp[ 18.443399] xt_time: kernel timezone is -0000[ 19.493616] Not a bridge device, or device not found: br-lanqcawifi configuration is disable[ 20.480277] random: nonblocking pool is initialized[ 22.769498] configuring additional NSS pbufs[ 22.791431] additional pbufs of size 9003008 got added to NSS[ 22.808061] __mm_init_module[ 22.823720] qdf_dbg_mask value is invalid[ 22.823741] Using the default module debug levels instead[ 22.826819] qdf_print_ctrl_register: Allocated print control object 0[ 22.832154] MINIDUMP VA .bss start=ffffffbffcc23700 module=qdf[ 23.070797] wlan: [4090:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50[ 23.070873] MINIDUMP VA .bss start=ffffffbffcea4080 module=umac*********initiating cold boot calibration******************starting cnssdaemon*****[ 23.184178][ 23.184178] MINIDUMP VA .bss start=ffffffbffd047580 module=qca_ol*****cnssdaemon pid=4111*********=======ol_if_register_wifi3_0==========[ 23.204367] wlan: [4115:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd11bd00[ 23.207007] remoteproc remoteproc0: powering up q6v5-m3[ 23.222681] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284[ 23.223820] Sanity check passed for M3 image[ 23.254162] remoteproc remoteproc0: remote processor q6v5-m3 is now up[ 23.254242] wlan: [4115:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2[ 23.259705] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done[ 23.266790] remoteproc remoteproc1: powering up q6v5-wcss[ 23.280341] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668[ 23.280558] Sanity check passed for the image[ 23.986112] glink_core_link_up glink is up[ 23.986249] glink_xprt_open_event[ 23.986328] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled[ 23.986440] Subsystem error monitoring/handling services are up[ 23.998927] remoteproc remoteproc1: remote processor q6v5-wcss is now up[ 24.004616] wlan: [4115:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3[ 24.005427] cnss: QMI WLFW service connected, state: 0x1[ 24.013815] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffc87c2c8[ 24.013916] cnss: device_id : 0xfffe mem mode : [0][ 24.110209] cnss: No board_id entry in device tree[ 24.114836] cnss: BDF location : 0x000000004b0c0000[ 24.114860] cnss: BDF IPQ8074/bdwlan.bin size 131072[ 24.118981] cnss: BDF download response , result: 0, err: 0x0[ 24.124171] cnss: per device BDF location : 0x000000004b0e0000[ 24.129610] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000[ 24.137449] cnss: BDF download response , result: 0, err: 0x0[ 24.234222] wlan: [4115:I:ANY] pld_ahb_wlan_enable: 681: cnss_mode: Cold boot calibration[ 24.336268] Coldboot calibration wait started[ 24.836314] Coldboot calibration wait ended[ 24.944322] wlan: [4115:I:ANY] ol_ath_do_cold_boot_calibration: 467: Coldboot calib successful: radio_id 0x65534[ 24.944347] cnss: QMI WLFW service disconnected, state: 0x7[ 24.954024] wlan: [4115:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)[ 24.958876] MINIDUMP VA .bss start=ffffffbffd11c180 module=wifi_3_0[ 24.971867] wlan: [4128:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 0[ 24.999664] remoteproc remoteproc1: stopped remote processor q6v5-wcss[ 24.999708] wlan: [4128:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 1[ 25.005264] glink_core_link_down glink is down[ 25.012298] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done[ 25.016845] remoteproc remoteproc0: stopped remote processor q6v5-m3[ 25.054316] glink_xprt_close_event[ 25.168455] MINIDUMP VA .bss start=ffffffbffd23a580 module=qca_ol[ 25.177050] =======ol_if_register_wifi3_0==========[ 25.177083] wlan: [4135:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd30ed00[ 25.180927] remoteproc remoteproc0: powering up q6v5-m3[ 25.193239] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284[ 25.198008] Sanity check passed for M3 image[ 25.206323] remoteproc remoteproc0: remote processor q6v5-m3 is now up[ 25.209940] wlan: [4135:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2[ 25.216367] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done[ 25.223431] remoteproc remoteproc1: powering up q6v5-wcss[ 25.229154] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668[ 25.234626] Sanity check passed for the image[ 25.590700] glink_core_link_up glink is up[ 25.590841] glink_xprt_open_event[ 25.593730] Subsystem error monitoring/handling services are up[ 25.597094] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled[ 25.597112] remoteproc remoteproc1: remote processor q6v5-wcss is now up[ 25.597151] wlan: [4135:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3[ 25.725253] cnss: QMI WLFW service connected, state: 0x1[ 25.726267] cnss: device_id : 0xfffe mem mode : [0][ 25.730381] cnss: No board_id entry in device tree[ 25.734957] cnss: BDF location : 0x000000004b0c0000[ 25.739159] cnss: BDF IPQ8074/bdwlan.bin size 131072[ 25.744143] cnss: BDF download response , result: 0, err: 0x0[ 25.749355] cnss: per device BDF location : 0x000000004b0e0000[ 25.754810] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000[ 25.762622] cnss: BDF download response , result: 0, err: 0x0[ 25.797654] wlan: [4135:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode[ 25.806215] wlan: [4135:I:ANY] qca_napi_create: 357: qca_napi_create: napi instance 0 created on pipe 4[ 25.806409] wlan: [4135:I:ANY] __ol_ath_attach: 3064: Allocated soc ffffffc036780880[ 25.814523] btcoex_support 0 wlan_prio_gpio 0[ 25.822537] wlan: [4135:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000[ 25.826864] wlan: [4135:I:ANY] osif_nss_wifi_soc_setup: 186: nss-wifili:#1 register wifili function for soc[ 25.838390] wlan: [4135:I:ANY] osif_nss_wifi_soc_setup: 198: nss register id -1 nss config 3 Target Type 18[ 25.848163] wlan: [4135:I:ANY] __ol_ath_attach: 3278: dev name soc0[ 25.858072] wlan: [4135:I:ANY] ol_ath_soc_attach: 6591: WMI attached. wmi_handle ffffffc0378ac400[ 25.863980] wlan: [4135:I:ANY] htc_wmi_init: 5958: htc_wmi_init() HT Create . ffffffc03669e000[ 25.872965] wlan: [4135:I:ANY] htc_wmi_init: 5965: htc_wmi_init() Skipping BMI Done.[ 25.881569] wlan: [4135:I:ANY] htc_wmi_init: 6022: [htc_wmi_init:6022] host_enable 0 nss_nwifi_offload 0[ 25.892525] wlan: [4135:I:ANY] ol_target_init_complete: 6140: CDP soc attach success[ 25.898991] wlan: [4135:I:ANY] ol_target_init_complete: 6147: Soc attach success NSS config 0[ 25.906781] wlan: [4135:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc03669e000, ep 2, value 1[ 25.915198] wlan: [4135:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc03669e000, ep 3, value 1[ 25.925957] wlan: [4124:I:TIF] init_deinit_atf_config_enable: 605: Airtime Fairness: num_peers=1058 num_active_peer=0[ 25.935795] wlan: [4124:I:TIF] HE_CAP Info = 1a08010d[ 25.946447] wlan: [4124:I:TIF] Num HW modes = 2[ 25.951462] wlan: [4124:I:TIF] Num PHY = 3[ 25.955811] wlan: [4124:I:TIF] Preferred HW Mode = 1 Num Radios = 2[ 25.959978] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes,[ 25.966147] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 0 wireless modes = f97f9001[ 25.974828] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes,[ 25.984110] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 1 wireless modes = 680680c[ 25.992732] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes,[ 26.001997] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 2 wireless modes = 397f9001[ 26.010714] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 390: dfs_offload 1[ 26.019798] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1038: dfs->dfs_psoc_idx: 0[ 26.030124] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1044: dfs_soc_obj->num_dfs_privs: 1[ 26.039751] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 362: Do not allocate DFS object for 2G, pdev_id = 1[ 26.068417] wlan: [4124:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success[ 26.083569] wlan: [4124:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success[ 26.183932] wlan: [4124:I:ANY] copy_fw_abi_version_tlv: 6258: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0[ 26.429688] wlan: [4124:I:ANY] dp_peer_map_attach_wifi3: 9983: dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112[ 26.429688][ 26.429896] wlan: [4124:I:ANY] ready_extract_init_status_tlv: 8002: ready_extract_init_status_tlv:0[ 26.441375] wlan: [4135:I:ANY] ol_ath_connect_htc: 1219: WMI is ready[ 26.508365] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 37 is unavailable[ 26.508676] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable[ 26.516185] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable[ 26.524916] wlan: [4135:I:ANY] ol_ath_soc_attach: 6665: connect HTC[ 26.533229] wlan: [4135:I:ANY] ol_ath_soc_attach: 6666: bypasswmi : 0[ 26.539398] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable[ 26.545994] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable[ 26.554503] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable[ 26.563016] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable[ 26.571604] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable[ 26.580201] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable[ 26.588705] wlan: [4135:I:ANY] ol_ath_soc_attach: 6741: ol_ath_soc_attach() UMAC attach .[ 26.597231] wlan: [4135:I:ANY] ath_lowi_if_netlink_init: 177: ath_lowi_if_netlink_init LOWI Netlink successfully created[ 26.605559] wlan: [4135:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi0[ 26.616433] wlan: [4135:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target[ 26.623420] wlan: [4135:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default[ 26.631305] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7206: interface_id 0[ 26.638645] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6895: phy id = 0 Modes supported[ 26.644806] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6902: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1[ 26.653264] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6910: Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6000[ 26.663397] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = f97f9001 before update[ 26.677831] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = f97f9001 after update[ 26.687419] wlan: [4135:I:ANY] ol_ath_update_ext_caps: 1842: 11ax 5G supported case[ 26.697691] wlan: [4135:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed[ 26.704706] ieee80211_cbs_init CBS Inited[ 26.714379] wlan: [4135:I:ANY] acfg_attach: 3457: acfg_attach: 3457: Netlink socket created:ffffffc035889800[ 26.715104] wlan: [4135:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX[ 26.725327] wlan: [4135:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats: 1[ 26.737119] wlan: [4135:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25[ 26.742636] wlan: [0:I:ANY] ol_ath_pdev_attach: 7542: Set global_ic[1], ptr:ffffffbffcea43e8[ 26.749956] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc036e0bc08) Enabling DBDC Repeater 1[ 26.758547] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 26.767298] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc036e0bc08) is_primary 1[ 26.775751] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7660: Pdev = 0 Number of peers = 529[ 26.784529] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11903: twt enabled.[ 26.784529][ 26.793956] wlan: [4135:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 1828: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5[ 26.793956][ 26.802039] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan 36 blocked from cfg[ 26.819293] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg[ 26.828843] wlan: [4135:I:ANY] osif_wrap_attach: 239: osif wrap attached[ 26.828843][ 26.838265] wlan: [4135:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done[ 26.838265][ 26.846333] wlan: [4135:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =ffffffc035889c00 ic->ic_wrap_com=ffffffc035889c00 &wrap_com->wc_devt=ffffffc035889c00[ 26.846333][ 26.855584] wlan: [4135:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60[ 26.871872] wlan: [4135:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi0 features 41[ 26.879898] wlan: [4135:I:ANY] wlan_cfg80211_init: 9619: Number of 5G channels: 25[ 26.890231] wlan: [4135:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc033d80880, wdev: 0xffffffc033d90a70, wiphy: 0xffffffc0366952a0, netdev: 0xffffffc033d80000[ 26.898113] wlan: [4135:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi1[ 26.913317] wlan: [4135:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target[ 26.920419] wlan: [4135:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default[ 26.927891] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7206: interface_id 1[ 26.935385] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6895: phy id = 1 Modes supported[ 26.941736] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6902: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1[ 26.950097] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6910: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0[ 26.960317] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = 680680c before update[ 26.974675] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = 680680c after update[ 26.984320] wlan: [4135:I:ANY] ol_ath_update_ext_caps: 1850: 11ax 2G supported case[ 26.993929] wlan: [4135:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed[ 27.001249] ieee80211_cbs_init CBS Inited[ 27.010948] wlan: [4135:I:ANY] acfg_attach: 3432: Offload using existing sock ffffffc035889800[ 27.011767] wlan: [4135:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX[ 27.020480] wlan: [4135:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats: 1[ 27.030968] wlan: [4135:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11[ 27.038184] wlan: [0:I:ANY] ol_ath_pdev_attach: 7542: Set global_ic[2], ptr:ffffffbffcea43e8[ 27.045530] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc030868788) Enabling DBDC Repeater 1[ 27.054031] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 27.062724] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc030868788) is_primary 0[ 27.071052] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7660: Pdev = 1 Number of peers = 529[ 27.080082] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11903: twt enabled.[ 27.080082][ 27.080990] wlan: [4135:E:WMI] event handler already registered 0x6019[ 27.081579] wlan: [4135:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 1828: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5[ 27.081579][ 27.081596] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan 36 blocked from cfg[ 27.081599] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg[ 27.081615] wlan: [4135:I:ANY] osif_wrap_attach: 239: osif wrap attached[ 27.081615][ 27.081618] wlan: [4135:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done[ 27.081618][ 27.081622] wlan: [4135:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =ffffffc036ca6400 ic->ic_wrap_com=ffffffc036ca6400 &wrap_com->wc_devt=ffffffc036ca6400[ 27.081622][ 27.081643] wlan: [4135:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60[ 27.081647] wlan: [4135:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi1 features 41[ 27.081663] wlan: [4135:I:ANY] wlan_cfg80211_init: 9607: Number of 2G channels: 11[ 27.081822] wlan: [4135:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc033dc0880, wdev: 0xffffffc033dd0a70, wiphy: 0xffffffc0379262a0, netdev: 0xffffffc033dc0000[ 27.082511] wlan: [4135:I:ANY] wlan_pdev_operation: 729: num_radios=1, wifi_radios[0].sc = ffffffc033d80880_radio_type = 2[ 27.082515] wlan: [4135:I:ANY] wlan_pdev_operation: 729: num_radios=2, wifi_radios[1].sc = ffffffc033dc0880_radio_type = 2[ 27.082536] wlan: [4135:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)[ 27.254130][ 27.254130] MINIDUMP VA .bss start=ffffffbffd30f180 module=wifi_3_0[ 27.254131] wlan: [4183:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd3a8558[ 27.260975] wlan: [4183:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd3a8558[ 27.273298] wlan: [4183:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss)No Direct-Attach chipsets found.[ 28.160710] EXT4-fs (mmcblk0p11): recovery complete[ 28.163020] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: commit=1[ 28.180352] EXT4-fs (mmcblk0p10): recovery complete[ 28.180380] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: commit=1[ 28.771451] ECM init[ 28.771511] ECM database jhash random seed: 0xe03e5578[ 28.793769] ECM init complete[ 29.227645] device eth0 entered promiscuous mode[ 29.228834] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready[ 29.273398] device eth1 entered promiscuous mode[ 29.273454] br-lan: port 2(eth1) entered forwarding state[ 29.277145] br-lan: port 2(eth1) entered forwarding state[ 29.282628] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready[ 29.293340] device eth2 entered promiscuous mode[ 29.294230] br-lan: port 3(eth2) entered forwarding state[ 29.298933] br-lan: port 3(eth2) entered forwarding state[ 29.310239] device eth3 entered promiscuous mode[ 29.310296] br-lan: port 4(eth3) entered forwarding state[ 29.314241] br-lan: port 4(eth3) entered forwarding state[ 29.327113] device eth5 entered promiscuous mode[ 29.327193] br-lan: port 5(eth5) entered forwarding state[ 29.330822] br-lan: port 5(eth5) entered forwarding state[ 29.424428] eth0: PHY Link up speed: 1000[ 29.578815] br-lan: port 1(eth0) entered forwarding state[ 29.578847] br-lan: port 1(eth0) entered forwarding statelbd: stopping daemon[ 29.872767] __mc_netlink_receive: Disable bridge snooping![ 29.884384] br-lan: port 2(eth1) entered disabled state[ 29.884695] br-lan: port 3(eth2) entered disabled state[ 29.888699] br-lan: port 4(eth3) entered disabled state[ 29.893768] br-lan: port 5(eth5) entered disabled stateacfg_tool: Issuing blocking call to wait for eventsWLAN 6 interfaces not ready, failedlbd: stopping daemon[ 30.169130] __mc_netlink_receive: Disable bridge snooping!acfg_tool: Issuing blocking call to wait for eventsqcawifi qcawificfg80211 disable radio wifi1qcawifi qcawificfg80211 disable radio wifi0acfg_tool: Issuing blocking call to wait for eventsacfg_tool: Issuing blocking call to wait for eventsqcawifi qcawificfg80211 enable radio wifi1[ 30.865516] wlan: [5633:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 13[ 30.865588] wlan: [5633:I:ANY] number of channels: 2G = 13 5G = 0[ 30.980195] wlan: [5648:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :bc:cf:4f:ff:18:82 ret: 0[ 31.000321] wlan: [5650:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0[ 31.059330] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc030868788) Enabling DBDC Repeater 0[ 31.059457] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 31.067246] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 31.075541] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 31.109145] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Disconnect_timeout value: 10[ 31.129969] wlan: [0:I:ANY] ol_ath_set_config_param: 2215: Reconfiguration_timeout value:60number of vifs: ath0 ath1 ath2 ath3 ath4 ath5[ 31.324354] wlan: [5760:I:ANY] wlan_cfg80211_add_virtual_intf: 306: proprietary mode 6 for interface: ath0 : clone params: 0x00000001[ 31.324423] wlan: [5760:I:ANY] osifp_create_wlan_vap: 10226: VDEV Create bc:cf:4f:ff:18:82[ 31.335359] wlan: [5760:E:CMN_MLME] mlme_vdev_ext_obj_create: 1325: VDEV MLME obj is creation[ 31.343581] wlan: [5760:I:ANY] wlan_vap_create: 1549: enter. devhandle=0xffffffc033dc0880, opmode=IEEE80211_M_HOSTAP, flags=0x1[ 31.343581][ 31.352416] wlan: [5760:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1[ 31.365302] wlan: [5760:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1[ 31.372316] wlan: [5760:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x7b[ 31.385899] wlan: [5760:I:ANY] ol_ath_vap_set_param: 2122: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged[ 31.392836] wlan: [5760:I:ANY] MBO Initialized[ 31.406873] wlan: [5760:I:ANY] OCE Initialized[ 31.411197] wlan: [5760:I:ANY] osif_nss_ol_vap_create: 1289: NSS wifi offload VAP create IF 31 nss_id -1[ 31.415634] wlan: [5760:I:ANY] NSS radio_if 29[ 31.425300] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1041: VDEV configuration success: 0[ 31.429613] wlan: [5760:I:ANY] osif_nss_ol_vap_create: 1397: vap create ffffffc0309e6880 : if_num 31[ 31.437866] wlan: [5760:I:ANY] wlan_vap_create: 1583: exit[ 31.447222] wlan: [5760:E:ANY] SA disabled[ 31.452689] wlan: [5760:E:ANY] SA disabled[ 31.456694] wlan: [5760:I:ANY] osif_create_vap_complete: 10421: TX Checksum:1|SG:1|TSO:1|LRO:0[ 31.460764] wlan: [5760:I:ANY] WLAN-NSS: VAP NSS ops initialized[ 31.470013] wlan: [5760:I:ANY] VAP device ath0 created osifp: (ffffffc0309e6880) os_if: (ffffffc03b7e8000)[ 31.574311] br-lan: port 1(eth0) entered forwarding state[ 31.684815] __mc_netlink_receive: Disable bridge snooping![ 31.716539] wlan: [5825:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1[ 31.891012] wlan: [5893:I:ANY] osif_nss_vdev_set_cfg: 1950: setting hifi mode 5[ 32.151648] wlan: [5918:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1[ 32.151692] wlan: [5918:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x73[ 32.200641] wlan: [5920:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:1|ul_mumimo:1[ 32.200684] wlan: [5920:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x63[ 32.251737] wlan: [5922:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:1[ 32.251789] wlan: [5922:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x43[ 32.301006] wlan: [5924:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:0[ 32.301050] wlan: [5924:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x3[ 32.549978] 8021q: adding VLAN 0 to HW filter on device ath0[ 32.550811] device ath0 entered promiscuous mode[ 32.555001] br-lan: port 6(ath0) entered forwarding state[ 32.559335] br-lan: port 6(ath0) entered forwarding state[ 32.565401] wlan: [4784:I:ANY] wlan_cfg80211_do_acs: 3295: vap-0(ath0):ACS Params[ 32.569982] wlan: [4784:I:ANY] wlan_cfg80211_do_acs: 3298: ht_enabled:0|ht40_enabled:0|vht_enabled:0|hw_mode:29|chwidth:20|[ 32.577536] wlan: [4784:I:ANY] ieee80211_autoselect_infra_bss_channel: 3697: ACS started: vap:0xffffffc03b7e8000[ 32.644384] eth4: PHY Link up speed: 1000[ 32.729956] wlan: [6119:I:ANY] wlan_cfg80211_set_wiphy_params: 1782: WARNING: Fragmentation with HT mode NOT ALLOWED!![ 32.743039] wlan: [6122:I:ANY] ol_ath_setTxPowerLimit: 3168: Tx power value is greater than supported max tx power 63, Limiting to default Max[ 32.743039]qcawifi qcawificfg80211 enable radio wifi0[ 33.449024] wlan: [6683:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 19[ 33.449150] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58[ 33.455775] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=106[ 33.463568] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=122[ 33.472207] wlan: [6683:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 19[ 33.480054] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58[ 33.487565] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=106[ 33.495720] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=122[ 33.503818] wlan: [6683:I:ANY] number of channels: 2G = 0 5G = 19[ 33.512085] wlan: [5333:I:ANY] ol_acfg_handle_wifi_ioctl: 417: ol_acfg_handle_wifi_ioctl: req->cmd=75 not valid for radio interface, it's for VAPError received: -22Could not send NL command[ 33.642520] wlan: [6819:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :bc:cf:4f:ff:18:83 ret: 0[ 33.666656] wlan: [6836:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0[ 33.741525] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc036e0bc08) Enabling DBDC Repeater 0[ 33.741639] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 33.749554] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 33.757853] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 33.790172] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Disconnect_timeout value: 10[ 33.813948] wlan: [0:I:ANY] ol_ath_set_config_param: 2215: Reconfiguration_timeout value:60number of vifs: ath10 ath11 ath12 ath13 ath14 ath15[ 33.975494] wlan: [7070:I:ANY] wlan_cfg80211_add_virtual_intf: 306: proprietary mode 6 for interface: ath10 : clone params: 0x00000001[ 33.975568] wlan: [7070:I:ANY] osifp_create_wlan_vap: 10226: VDEV Create bc:cf:4f:ff:18:83[ 33.986734] wlan: [7070:E:CMN_MLME] mlme_vdev_ext_obj_create: 1325: VDEV MLME obj is creation[ 33.995006] wlan: [7070:I:ANY] wlan_vap_create: 1549: enter. devhandle=0xffffffc033d80880, opmode=IEEE80211_M_HOSTAP, flags=0x1[ 33.995006][ 34.003653] wlan: [7070:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1[ 34.016697] wlan: [7070:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1[ 34.023545] wlan: [7070:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x7b[ 34.037165] wlan: [7070:I:ANY] ol_ath_vap_set_param: 2122: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged[ 34.044068] wlan: [7070:I:ANY] MBO Initialized[ 34.058138] wlan: [7070:I:ANY] OCE Initialized[ 34.062427] wlan: [7070:I:ANY] osif_nss_ol_vap_create: 1289: NSS wifi offload VAP create IF 34 nss_id -1[ 34.066898] wlan: [7070:I:ANY] NSS radio_if 28[ 34.076528] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1041: VDEV configuration success: 0[ 34.080841] wlan: [7070:I:ANY] osif_nss_ol_vap_create: 1397: vap create ffffffc0297be880 : if_num 34[ 34.089094] wlan: [7070:I:ANY] wlan_vap_create: 1583: exit[ 34.098449] wlan: [7070:E:ANY] SA disabled[ 34.103922] wlan: [7070:E:ANY] SA disabled[ 34.107918] wlan: [7070:I:ANY] osif_create_vap_complete: 10421: TX Checksum:1|SG:1|TSO:1|LRO:0[ 34.111990] wlan: [7070:I:ANY] WLAN-NSS: VAP NSS ops initialized[ 34.121368] wlan: [7070:I:ANY] VAP device ath10 created osifp: (ffffffc0297be880) os_if: (ffffffc029668000)[ 34.320448] wlan: [7197:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1[ 34.424437] eth0: PHY Link is down[ 34.466534] wlan: [7221:I:ANY] osif_nss_vdev_set_cfg: 1950: setting hifi mode 5[ 34.554324] br-lan: port 6(ath0) entered forwarding state[ 34.697312] wlan: [7246:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1[ 34.697354] wlan: [7246:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x73[ 34.760473] wlan: [7270:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:1|ul_mumimo:1[ 34.760518] wlan: [7270:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x63[ 34.815087] wlan: [7300:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:1[ 34.815131] wlan: [7300:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x43[ 34.870117] wlan: [7331:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:0[ 34.870160] wlan: [7331:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x3[ 34.884631] br-lan: port 1(eth0) entered disabled state[ 35.130617] 8021q: adding VLAN 0 to HW filter on device ath10[ 35.131431] device ath10 entered promiscuous mode[ 35.135561] br-lan: port 7(ath10) entered forwarding state[ 35.140064] br-lan: port 7(ath10) entered forwarding state[ 35.215787] wlan: [4784:I:ANY] DES SSID SET=altuntepe2[ 35.215814] wlan: [4784:I:ANY] wlan_cfg80211_set_phymode: 1151: cfg80211 mode:30[ 35.220754] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2734: Keyix=1 Keylen=16 Keyflags=1 Cipher=4[ 35.227427] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2735: macaddr bc:cf:4f:ff:18:83[ 35.236420] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:100[ 35.236578] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps)[ 35.244437] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5500.[ 35.244448] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5520.[ 35.244451] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5540.[ 35.244454] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5560.[ 35.425630] wlan: [7661:I:ANY] wlan_cfg80211_set_wiphy_params: 1782: WARNING: Fragmentation with HT mode NOT ALLOWED!![ 35.435223] wlan: [7668:I:ANY] ol_ath_setTxPowerLimit: 3168: Tx power value is greater than supported max tx power 63, Limiting to default Max[ 35.435223][ 35.453472] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:100[ 35.453630] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps)[ 35.458027] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5500.[ 35.463061] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5520.[ 35.478876] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5540.[ 35.479236] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5560.[ 35.944013] __mc_netlink_receive: Disable bridge snooping![ 36.424510] eth0: PHY Link up speed: 1000[ 36.424597] br-lan: port 1(eth0) entered forwarding state[ 36.427545] br-lan: port 1(eth0) entered forwarding state[ 36.802311] wlan: [4091:I:ANY] vap-0(ath0): ACS result PCH 10, SCH 0, hw_mode 1 chwidth 40, vht_seg0 8, vht_seg1 0[ 36.802363] wlan: [4091:I:ANY] ieee80211_acs_scan_evhandler: 3441: lock held duration: 1(ms)[ 36.832011] wlan: [4784:I:ANY] DES SSID SET=altuntepe2[ 36.832040] wlan: [4784:I:ANY] wlan_cfg80211_set_phymode: 1151: cfg80211 mode:29[ 36.836880] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2734: Keyix=1 Keylen=16 Keyflags=1 Cipher=4[ 36.843601] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2735: macaddr bc:cf:4f:ff:18:82[ 36.936744] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:10[ 36.937031] wlan: [0:E:ANY] SA disabled[ 36.940847] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps)[ 36.944504] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps)[ 37.144315] br-lan: port 7(ath10) entered forwarding state[ 38.424302] br-lan: port 1(eth0) entered forwarding stateWLAN 4 interfaces not ready, failed[ 52.597272] __mc_netlink_receive: Enable bridge snooping![ 59.181464] Bluetooth: Out-of-order packet arrived, got 1 expected 0[ 64.424521] eth0: PHY Link is down[ 64.424765] br-lan: port 1(eth0) entered disabled state[ 66.424523] eth0: PHY Link up speed: 1000[ 66.424617] br-lan: port 1(eth0) entered forwarding state[ 66.427568] br-lan: port 1(eth0) entered forwarding state[ 68.424323] br-lan: port 1(eth0) entered forwarding state[ 97.604313] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_cac_timeout: 111: cac expired, chan 5500 curr time 4294764[ 97.604631] wlan: [0:E:WMI] event handler already registered 0x2a001[ 97.613589] wlan: [0:E:ANY] SA disabled[ 97.620098] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps)[ 97.623677] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5500.[ 97.629188] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5520.[ 97.637606] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5540.[ 97.646118] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5560.NBG7815 login:

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING